How to Use a Room Planner With Your Own Furniture
Published · Updated · By the Best Room Planner App team (FurniMesh)
Room planner catalogs are full of generic pieces. They are close enough for a mood check and wrong enough to mislead a fit check. This guide shows how to put a model of the actual piece into your plan: the sofa you already own, or the one you are about to order.
The workflow has three parts. You make a 3D model from a photo with FurniMesh (furnimesh.com), you set it to the real measured size, and you import it in a format your planner accepts. FurniMesh's image-to-3D tool is our own product, so weigh our recommendation with that in mind; the import steps work the same with a model from any source.
When a catalog stand-in is good enough, and when it is not
Use a catalog piece when the furniture sits in open space with plenty of room around it. A 30-inch side table in a corner does not need a perfect model.
Model the real piece when any of these apply: the item is large (sofas, sectionals, beds, wardrobes, dining tables); it goes into a tight spot, such as a sofa between a door swing and a radiator; or its shape matters, such as a chaise, rolled arms, a pedestal base or angled legs. In those cases the footprint and silhouette decide whether a walkway stays at 36 inches or drops to 28.
What you need before you start
- One clear photo of the piece. A product listing photo works well, as does your own photo taken square-on in good light against a plain wall.
- The real outer dimensions: width, depth and height in inches or centimeters, taken from the spec sheet or measured with a tape at the widest points.
- A planner that accepts imported models. The table further down lists which formats each app takes.
- A FurniMesh account. New accounts get 50 one-time credits, enough for about 10 generations with previews. Downloading the generated file needs a paid plan; Individual is $24.99 a month, or about $19.99 a month billed yearly, as listed in November 2026.

Turn the photo into a 3D model
Upload the photo on the Image to 3D page. FurniMesh accepts JPEG, PNG and WebP. The pipeline removes the background, builds the mesh and bakes the textures, and a model is usually ready in a few minutes; complex pieces such as sectionals can take longer. Each generation comes with the rendered model, a wireframe and a normal map, so you can see the geometry before you download.
Check the preview from every side before using it. The photo shows one view; the back and underside are inferred by the AI. For planning that is usually fine, because what matters is the outline on the floor and the height. For production use, such as a retailer's product page, inspect the model more closely.
Photo tips that make the biggest difference: shoot the whole piece with a little space around it, keep the camera at about seat height, and avoid strong shadows across the object. One object per photo; FurniMesh models single pieces, not rooms or people.
Pick the export format your planner reads
FurniMesh exports native GLB, OBJ, SKP (opens in SketchUp 2017 and later, Free, Pro or Studio) and BLEND, and its converter adds more formats such as FBX, STL and glTF. The right choice depends on the planner. We checked each vendor's own documentation in November 2026.
| Planner | Accepts | Best file from FurniMesh | Plan needed |
|---|---|---|---|
| SketchUp Free (web) | .skp, .jpg, .png | SKP | Free, personal use |
| SketchUp Pro / Studio | .skp, .3ds, .dae, .stl, glTF/.glb and more | SKP or GLB | Pro $399/yr |
| Sweet Home 3D | OBJ, DAE, 3DS, KMZ, ZIP | OBJ | Free |
| Live Home 3D | OBJ, FBX, 3DS, DAE | OBJ | See vendor store |
| Homestyler | MAX, RAR, ZIP, glTF, GLB, SKP | GLB or SKP | Basic: 3 uploads |
| Planner 5D | .obj, .fbx, .blend and others | OBJ or BLEND | Professional |
| IKEA Kreativ, Magicplan, RoomSketcher, Floorplanner | No custom model import published | Use a sized box (see below) | n/a |
One trap to avoid: SketchUp lists OBJ and FBX as export formats only. If you download an OBJ and try to open it in SketchUp, it will not import without a third-party extension. Download the SKP instead, or convert an existing OBJ or GLB to SKP with the FurniMesh converter.

Set the model to its real size
A model generated from a photo has the right proportions but cannot know the real scale on its own. Always set the size in the planner using the measured outer dimensions. Here is a worked example with a three-seat sofa whose spec sheet reads 86 in wide, 37 in deep and 33 in high (218 by 94 by 84 cm).
Scale uniformly using the width, then check the other two numbers. If depth or height is off by more than about half an inch after a uniform scale, the AI inferred the proportions slightly wrong; set each axis directly to the measured value. In Sweet Home 3D, type the three values in the import wizard. In SketchUp, use the Tape Measure tool on the model's width and type the real length to rescale the whole component.
Import it into your planner
SketchUp
Open your room model and import the SKP: File > Import on the desktop app, or the import option in the web app's file panel. It arrives as a component. Move it into place against the wall with the Move tool and inference snapping. On Pro or Studio you can also import a GLB through File > Import.
Sweet Home 3D
Choose Furniture > Import furniture, select the OBJ, and step through the wizard. In the attributes step, enter the measured width, depth and height and set elevation to zero, then add the piece to the catalog. It now behaves like any built-in piece, with corner handles for fine adjustments.
Homestyler
Use the model upload option and pick the GLB or SKP. On the free Basic plan you have three uploads, so upload only the large pieces that decide the layout.
No import? Use a measured box
For apps that do not take custom models, place the closest catalog item and resize it to the measured outer width and depth, or draw a box. Note the shape differences on the plan. A sofa with a 62-inch chaise on the left needs that chaise drawn as a second box; otherwise the walkway past it will look 25 inches wider than it is.

Shopping case: test a sofa before you buy it
The same workflow works for furniture you do not own yet. Save the retailer's main product photo, generate a model, set it to the listed dimensions, and place it in your plan. Then check three things: the walkway in front stays at least 36 inches as a common guideline, the sofa clears the door swing, and the delivery path (front door, hall corners, stair turns) is wider than the sofa's depth or diagonal. Product photos belong to the retailer, so keep these models for your own planning.
If the piece is a standard design, search FurniMesh's free SketchUp library first. It holds over 19,000 SKP furniture models, and a ready-made file costs nothing beyond a free account. Our free planner guide lists which free apps can open it.
Common problems and fixes
The model floats or sinks. Set elevation to zero, or in SketchUp move the component so its lowest point sits on the floor plane.
The model faces the wrong way. Rotate it 90 or 180 degrees in the planner; the generator picks an orientation from the photo.
The planner slows down. Generated meshes are dense. Import only the pieces that affect fit, and keep small decor as catalog items.
Textures look flat. Some planners show simple shading in plan view and full textures only in 3D or render mode. Switch views before re-exporting.
FAQ: your own furniture in a room planner
Can I add my own furniture to Planner 5D?
Yes, on the Professional plan, which allows uploading 3D models in .obj, .fbx, .blend and other formats. The free and Premium plans do not include model uploads.
Can SketchUp import OBJ files?
Not natively. SketchUp lists OBJ as an export format. Use an SKP file, or on Pro and Studio a glTF or GLB file, or convert the OBJ to SKP first.
How accurate is a 3D model made from one photo?
The visible side is usually close, while hidden sides and fine details are inferred. For planning, set the measured width, depth and height in the planner and the footprint will be correct.