Best Room Planner App

Disclosure: this site is made by the FurniMesh team. FurniMesh (furnimesh.com) is our own product, and we say so wherever we recommend it. How we handle this

How to Measure a Room for a Room Planner App

A room planner is only as accurate as the numbers you type in. Most layout mistakes come from three measuring errors: rounding every wall, skipping the diagonals, and forgetting what sits on the walls. This guide fixes all three with one complete worked example.

You will need a 25-foot tape measure, a pencil and paper (or the sketch below), and about 20 minutes per room. Once the room is in your planner, you can place furniture models of your actual pieces; FurniMesh (furnimesh.com) can build those from a photo, and our own-furniture guide covers the import.

Scan or tape? Decide first

If you have an iPhone Pro or iPad Pro with LiDAR, scanning apps such as Magicplan (LiDAR Auto-Scan, built on Apple's RoomPlan), Planner 5D's Scan Room and IKEA Kreativ can capture walls and openings in a minute or two. Magicplan's own help notes that open floor plans, stairwells and glass walls are hard to auto-scan, and suggests its manual mode for those.

Even with a scan, take three tape measurements to check it: the longest wall, one door width and the ceiling height. If the scan is off by more than about half an inch on any of them, correct it in the app before you place furniture. Without LiDAR, use the tape method below.

Sketch the room before you measure anything

Draw the room outline freehand, as seen from above. Label the walls A, B, C and D clockwise, starting with the wall that has the main entry door. Mark every door, window, radiator, fireplace and built-in on the sketch. The sketch does not need to be to scale; it is a form you fill in.

This step stops the most common error, which is ending up with four numbers and no idea which wall each one belongs to.

Measure the walls at floor level

Measure each wall along the floor, corner to corner, and write it down to the nearest quarter inch. Do not round to the foot. Measure at floor level because that is where furniture stands; baseboards are usually included in the room, so measure from baseboard face to baseboard face.

Here is the worked example: a living room with the entry on wall A.

Wall A (entry wall) 14 ft 2 in = 170 in = 431.8 cm Wall B (window wall) 11 ft 9 in = 141 in = 358.1 cm Wall C (opposite A) 14 ft 1 3/4 = 169.75 = 431.2 cm Wall D (opposite B) 11 ft 9 in = 141 in = 358.1 cm

Wall C is a quarter inch shorter than wall A. That is normal; walls are rarely perfectly parallel. Enter the real values rather than averaging, or your planner will draw a room that does not exist.

Check the corners with diagonals

Measure both diagonals, corner to opposite corner. In a perfectly rectangular room they are equal, and each equals the square root of length squared plus width squared.

Expected diagonal = sqrt(170² + 141²) = sqrt(48,781) = 220.9 in Measured diagonal 1 = 221 in Measured diagonal 2 = 222 1/2 in Difference = 1 1/2 in -> corners are slightly out of square

A difference under about a quarter inch can be ignored. Here, one and a half inches means one corner is a little more than 90 degrees. Most planners let you drag a corner or type wall angles; adjust until both diagonals in the app match your measurements. It matters for built-ins and for long pieces placed along the out-of-square wall.

Locate doors and windows from a fixed corner

For each opening, measure from the same reference corner to the near edge of the trim, then the width of the opening including trim. For windows, add the sill height from the floor and the height of the top of the trim. For doors, note which way the door swings and which side the hinges are on, because the swing arc is space you cannot furnish.

Wall A entry door starts 6 in from corner A/D width 32 in, trim 3 in swings into room, hinges on the corner side, arc radius 32 in Wall B window starts 31 in from corner A/B width 72 in incl. trim sill 30 in above floor, top of trim 84 in Wall D radiator starts 46 in from corner C/D width 40 in depth 9 in height 24 in

Measuring every opening from one corner of its wall, rather than from the previous opening, keeps small errors from adding up along the wall.

Late 18th-century elevation drawing of a salon wall with doors, panels and seating
Design for Elevation of Salon Wall, Prince of Hesse Palace, ca. 1790. Photo: Unknown artist, Cooper Hewitt collection, Public domain, via Wikimedia Commons (file page).

Record what is on the walls

Outlets, switches, vents, thermostats and TV cable plates decide where furniture can go. Measure each one from the same corner, plus its height above the floor. A floor vent under a planned sofa or an outlet hidden behind a bookcase is cheap to spot on a plan and annoying to discover on delivery day.

Add the ceiling height in at least two places. In the example it is 96 in (8 ft) at the entry and 95 3/4 in by the window, a quarter-inch slope you can ignore. Note any beam, soffit or sloped ceiling with its height and position, because tall bookcases and wardrobes can collide with them.

Enter the measurements in your planner

Most planners let you either drag walls and then type a length, or start from a rectangle and edit each side. The order that avoids drift:

In the example, the finished floor area is 170 by 141 inches, which is 23,970 square inches, or 166.5 square feet (15.5 square meters). If your planner reports a very different area, a wall length was typed wrong.

A first fit check with the example room

With the room in place, test one real layout before moving on. Put an 86 by 37 inch sofa centered on wall C, which is clear of openings, with a 48 by 24 inch coffee table 16 inches in front of it, and a 16-inch-deep TV console on wall A.

Room depth (wall C to wall A) 141 in Sofa depth -37 Sofa to coffee table -16 Coffee table depth -24 TV console depth -16 Remaining walkway 48 in (comfortable; 36 in is a common minimum)

The 48-inch result says the layout works with room to spare. Swap in a sofa with a 64-inch-deep chaise and that side of the room drops to 21 inches of walkway, which is not enough. That is the kind of difference a real model of the piece reveals and a generic catalog sofa hides. The clearance guide lists the common distances for other rooms.

Mistakes that throw off a room plan

Measuring at waist height. The tape sags and furniture, window trim or a chair rail gets in the way. Measure along the floor.

Ignoring the door swing. A 32-inch door claims a quarter circle of 32-inch radius. Draw it.

Forgetting baseboards and radiators. A 9-inch radiator turns an 86-inch wall gap into 77 inches of usable length for anything that must sit flush.

Mixing units. Write every value in one unit, or note both as in the example, and set the planner to match.

Room measuring FAQ

Should I measure a room including the baseboards?

Measure at floor level from baseboard face to baseboard face. That is the space furniture can actually occupy.

How accurate do room measurements need to be for a planner?

To the nearest quarter inch, or half a centimeter, is enough for furniture planning. Built-in cabinets need more care and usually a professional measure.

Can my phone measure the room for me?

On iPhone Pro and iPad Pro models with LiDAR, apps such as Magicplan, Planner 5D and IKEA Kreativ can scan the room. Check the scan against a few tape measurements before relying on it.